Automotive OEM

Data Acquisition (DAQ) and Measurement Chain Setup

We install the DAQ measurement chain, condition logging, report format and operator acceptance for product and process characterization — your team runs the measurements.

Telemetry Recording and Replay

Deterministic recording of test and mission telemetry on a common time axis, synchronised replay and event-segment analysis.

Decision makerR&D / Test Systems Manager

Production line

Priority: Very high

Context

Track line efficiency with OEE and downtime records; see energy use in the same frame.

Trigger

A capacity or unit-cost target makes production visibility a priority.

Concrete work

Field data collection, OEE / downtime analysis and combined energy monitoring

First step

We start with a downtime and efficiency monitoring pilot on one line.

Related solutions

Shop-Floor Data Acquisition & Edge Infrastructure

Edge infrastructure that collects data from machines, PLCs, meters and sensors; protocol conversion and secure handoff to upper systems.

OEE Monitoring & Downtime Analysis

OEE monitoring and downtime-analysis software that measures availability, performance and quality losses by the second.

Energy + OEE Integrated Measurement

Measurement and software that combine energy (kWh), downtime and scrap on one baseline — real unit cost and loss records per product.

Decision makerProduction Director

Assembly and traceability

Priority: Very high

Context

Keep vehicle or critical-joint records audit-ready by serial number.

Trigger

A customer or internal audit asks for the traceability file.

Concrete work

Serial / lot traceability and quality-record digitisation

First step

We clarify the traceability scope together on a selected station.

Related solutions

Serial / Lot-Based Traceability

Serial/lot process records from raw material to shipment; traceability software and regulation-portal links where required.

SPC and Quality Record Digitization

Quality software that produces automatic SPC control charts and nonconformity records from measurement data.

Shop-Floor Data Acquisition & Edge Infrastructure

Edge infrastructure that collects data from machines, PLCs, meters and sensors; protocol conversion and secure handoff to upper systems.

Decision makerQuality / Assembly Manager

Plant energy and savings verification

Priority: High

Context

Monitor energy with sub-meters; make savings verifiable against a baseline.

Trigger

An energy-management programme or per-product cost target opens.

Concrete work

Energy monitoring (WAGES), EnMS / M&V and combined energy + OEE view

First step

We map the measurement scope and draft the monitoring plan together.

Related solutions

Energy Monitoring and Sub-Metering (WAGES)

We meter and monitor electricity, gas, water, compressed air and steam at point level; the software produces baseline and verifiable savings records.

EnMS / ISO 50001 and Savings Verification (M&V)

Energy metering and monitoring infrastructure plus software that produces EnPI and baseline-adjusted savings records.

Energy + OEE Integrated Measurement

Measurement and software that combine energy (kWh), downtime and scrap on one baseline — real unit cost and loss records per product.

Decision makerEnergy / Facilities Manager

New line investment

Priority: High

Context

Try new-line integration with virtual commissioning before the site.

Trigger

A new model or line conversion has a short commissioning window.

Concrete work

Virtual commissioning, process simulation and line digital twin

First step

We start with a virtual validation trial at a single station.

Related solutions

Virtual Commissioning

Validating PLC, robot and sensor behaviour in a virtual environment before a new line or machine is installed on site.

Process and Capacity Simulation

Scenario comparison report, bottleneck map, capacity utilization projection.

Plant / Line Digital Twin

A plant or line digital twin fed by real-time field data; bottleneck and capacity scenario records.

Decision makerManufacturing Engineering Manager

Press, robot and conveyor maintenance

Priority: High

Context

Monitor critical-asset health signals and bind maintenance decisions to records.

Trigger

Unplanned-stoppage cost or a maintenance-programme refresh comes up.

Concrete work

Asset-health monitoring and predictive-maintenance records

First step

We define the monitoring scope together on a selected asset group.

Related solutions

Asset Health Monitoring & Predictive Maintenance

Vibration, temperature or current monitoring on critical assets; early-fault alerts and asset-health records.

Shop-Floor Data Acquisition & Edge Infrastructure

Edge infrastructure that collects data from machines, PLCs, meters and sensors; protocol conversion and secure handoff to upper systems.

Anomaly Detection & Early Warning

Anomaly and early-warning software that detects unusual patterns in process measurements.

Decision makerMaintenance Manager

End-of-line diagnostics

Priority: Very high

Context

Bind end-of-line diagnostic and test results to the vehicle record.

Trigger

A new model or quality gate asks for diagnostic integration.

Concrete work

End-of-line diagnostics / test integration and traceability records

First step

We clarify protocol and record scope together on a selected station.

Related solutions

End-of-Line Diagnostics & Test Integration

A software and device pack that integrates end-of-line diagnostic protocols (UDS, DoIP, CAN FD), automates tests and produces vehicle/part-level test records.

Serial / Lot-Based Traceability

Serial/lot process records from raw material to shipment; traceability software and regulation-portal links where required.

Data Acquisition (DAQ) and Measurement Chain Setup

We install the DAQ measurement chain, condition logging, report format and operator acceptance for product and process characterization — your team runs the measurements.

Decision makerQuality / Manufacturing Engineering

Positioning verification

Priority: High

Context

Verify accuracy of an installed positioning infrastructure with measured acceptance.

Trigger

A new RTLS / UWB install or safety application asks for acceptance.

Concrete work

Positioning system verification and acceptance testing

First step

We write the reference path and acceptance thresholds together.

Related solutions

Positioning System Verification & Acceptance

A test and acceptance pack that verifies accuracy, response time and acceptance criteria of an indoor positioning infrastructure—installed or to be installed—with measured records.