Usage context
Context
01
Narrative · 01
Context
Instrumentation and a record setup are installed so cycle, load and measurement data stay on the durability/life-test bench.
Test bench & product validation
Instrumentation and record setup for durability / life tests
An instrumentation and record setup on the customer bench that captures condition, measurement and margin data for durability and life-test cycles.
Solution flow
01
Context
Instrumentation and a record setup are installed so cycle, load and measurement data stay on the durability/life-test bench.
02
What we do
We write the channel plan and acceptance criteria before the test; with DAQ and protocol we record each cycle’s data, conditions and margins. The bench does not run until the protocol is signed.
03
What you get
Condition, margin, uncertainty and result recorded together.
Our approach
What we do
02
Narrative · 02
What we do
We write the channel plan and acceptance criteria before the test; with DAQ and protocol we record each cycle’s data, conditions and margins. The bench does not run until the protocol is signed.
Deliverables
What you get
03
Narrative · 03
What you get
Condition, margin, uncertainty and result recorded together.
04
How we verify
The defensibility of a test result depends on verifying the measurement chain as much as the result itself; acceptance requires the channel plan and acceptance criteria to be written in a signed protocol and every cycle's condition, margin and uncertainty to be recorded.
05
What is required
Requires access to the specimen and test bench, the channel plan and acceptance criteria written and signed before testing, and calibration data for the uncertainty budget.
How it works
The measurement and record setup on a durability/life-test bench keeps cycle, load and measurement records. Pass/fail decisions bind to that record; acceptance criteria are written in the project definition. The customer team runs the test.
A decision with no record
When cycle data is not stored, and a repeat test gives a different result with a different operator, there is no data to settle the dispute. The result remains indefensible.
Signed protocol
The channel list, sampling rate and pass/fail criteria are written in the test protocol; each channel is mapped to a physical connection and data path. The bench does not run until the protocol is signed.
Verifying the chain
Each cycle's condition, margin and uncertainty are recorded time-aligned; the uncertainty budget is part of the acceptance criterion. The same test can be run once and examined a hundred times.
What comes next
Stable test records become the data source for automation regression and digital-twin scenarios.
Record chain
Record context
From obligation to measured record to produced output.
01
Obligation / requirement
Test, qualification or verification record requirement
02
Required record
Test and simulation result records
03
What AEON produces
Traceable test data and objective evaluation records
What's included
- Condition
- Margin
- Uncertainty and result together
- Channel plan and acceptance criteria written before the test
Industry context
Industry contexts where this solution is often relevant.
Related solutions
Solutions often considered together.
Contact
Let’s clarify the scope together
We clarify a suitable scope together based on your site, industry and goals.